News RSS

Follow the steps below to activate your camera before connecting it to your Network Video Recorder or integrating it into your network.Default IP Address: 192.168.1.168Default Username: adminDefault Password: adminCamera Protocol: Onvif________________________________________STEP 1.) Download Camera Management SoftwareDownload & install the “AmSecu Device-Config-Tool” from http://amsecu.com/device-config-tool on your Windows computer. STEP 2.) Connect the IP Camera to your networkConnect your IP Camera to your network ensuring that it is powered on (PoE or Power Adapter). “Network” in this scenario refers to your Wi-Fi Router, PoE Network Switch, or Regular Network Switch with a power adapter connected to the camera. STEP 3.) Search for...

Read more

1. Just click the login button, even if the password is wrong; 2. Click the right and left mouse button successively in a blank area of the message box (as shown in the picture) six times. 3. Click "Yes" to confirm you want to restore the default user. 4. Enter a new password for the NVR leaving the old password slot empty. Attention: You must reset the password for the user admin, just leave the old password blank and create a new one that is no longer than 10 characters. If at any point during this guide you need our...

Read more

Quick Guide (How to reset password of IPC/NVR)   IMPORTANT NOTES: Please keep in mind the device must stay connected and powered on throughout this entire process. Any interruption will cause this process to fail. If at any point during this process you need assistance. Please email us at info@amsecu.com or call us (949) 536-7268 Netview Solutions LLC https://amsecu.com/     Step 1: Head over to https://amsecu.com/device-config-tool to download and install our Device Config tool which will assist you in finding the required information to proceed with the password reset. Step 2: Open the tool and connect your camera to...

Read more